For all the "Rite" Loading Dock Solutions

• Lift Tables
  •  LDS-Loading Dock
  •  SSL-Standard
  •  SLS-Super Lift
• Tilt Top/Conveyor Top
• Double & Triple Scissors
• Tandem Scissor Tables

• Lift/Tilt Specs (PDF)
• Lift/Tilt Options (PDF)
• Ergonomics (PDF)

• View current newsletter (PDF)
• 
  Enter your email address below
  to subscribe to our newsletter.

"SSL" Standard Scissor Lift Series

Our 'SSL' (standard scissor lift) table series meets the demand for constant lifting and lowering of all your material handling needs.

SSL scissor lift series are the most versatile and hardest working models.  The SSL can be configured in a multitude of ways to handle the smallest jobs to the most demanding lifting and production work.  It can be customized to meet many specific requirements.

Highlights:

• Standard capacities: 2,000 to 10,000 lbs (custom to 30 000).
• Deck Sizes: 24" x 48" to 48" x 108"
• Cylinders:
  2 ea. - 4,000 lb. to 10,000 lb. capacities
  1 ea. - 2,000 lb. capacity
• Up Limit Switch: Standard on 8,000 and 10,000 lb. capacity models only
• Raised heights: 31" to 71".
• Motor: 1HP, External
• Control: Handheld Push-button, NEMA 4X Standard 1HP units are ready to plug in & begin operating
• Top deck, solid steel legs, and rigid structural base.
• Minimal maintenance.
• Accessible from all sides at all levels.
• Optional portable, semi-portable and "V" grooved wheels for track movement.
• Remote or self contained powerpack.
• All units are shipped complete with hydraulic fluid, ready to operate

Features:

• ITS certification, UL, CSA, Hydro approved power packs & controls
• 1 HP / 115 v/1 ph/ 60hz remote powerpack (3000-6000M lbs.) ( requires dedicated 20amp circuit )
• 3 HP/208,230,460,575v/3ph/60hz TENV motor (8000-10000 lbs.)
• Powerpack includes pressure relief, check and flow control valves, oil level gauge and reservoir filter.
• TEFC continuous duty motor.
• NEMA 12 motor control enclosure.
• NEMA 4 motor rated push button control on 10' cord
• 10' hydraulic hose
• Smooth steel platform
• Structural steel base frame
• Safety striping on platform edges
• Velocity fuse fall safe protection to prevent descent in the event of loss of hydraulic pressure.
• Flow control valve tp meter lowering speed.
• Standard gray enamel paint finish.
• Ground and hard chrome solid rod hydraulic cylinders rated at 3,000 psi working pressure
• Ground superior shafting pivot pins
• Hydraulic cylinders vented back to reservoir.
• Lifetime lubricated teflon coated "DU" type bushings.
• Abrasion, oil and weather resistant hydraulic hoses with 4 to 1 factor of safety at 3000 psi working pressure.
• Solid steel scissor legs, ( 44,000 psi minimum yield )
• Sealed cam follower rollers

Options:

• Higher capacities & higher lift heights
• Oversized platforms & bases
• Onboard power packs & motor controls
• Tapered or electric toe guards
• Conveyor top platforms (gravity & powered)
• Tandem lifts (for longer & heavier loads)
• Rotating platforms / turntable (manual or powered )
• Tilt top platforms
• Bellows curtains
• Portability (casters, wheels, air bearings)
• 1 - 3 hp, 220-575/3/60, 12 - 24v DC, 1 - 4 hp air motors
• Wash down & explosion proof electrical
• Guarded foot control; foot pedal controls or automated operation
• Accordion curtain enclosures
• Custom finishes (paint or galvanized)
• Stainless steel platforms
• Custom designs

Models:

Notes:
- Specifications and design subject to change without notice
- Oversized platforms may require wider base frames
- Products as shown may have options and accessories
- All electrical components are UL and CSA listed