For all the "Rite" Loading Dock Solutions

• Access Controls
• Phone Entry
• Gate Operators
  •  Swing Gate Operators
    •  Model 400
    •  Model 415
    •  Model 760
  •  Slide Gate Operators
• Traffic Barriers
• Police/Fire/EMS
• Gate Hardware
• Installation Planning
• Photo Galleries

•  Limit Switch Adjustment
•  Manual Release Mechanism
•  Schematic
•  Specifications

• View current newsletter (PDF)
• 
  Enter your email address below
  to subscribe to our newsletter.

Model 415 Electromechanical Swing Gate Operator

The Model 415 Electromechanical Swing Gate Operator is suitable for residential and light commercial use on gates up to 14 feet long per leaf and 24-foot bi-parting gates, 100 operations per hour (vehicles only; not for pedestrian use).

The non-reversing system ensures the gate is mechanically locked when the motor is not running. A convenient and secure release system with customized key makes it possible to manually move the gate in the event of a power failure.

Highlights:

• Sleek design
• Smoothness in operation and lack of noise or vibration
• Built-in sealed limit switches in the closed and open positions and One Touch EZ programming of all operating functions
• Operates even in case of power failure (with optional battery back-up and subject to battery condition)
• Slow down “soft stop”
• Reverse on contact
• Release device - key protected and easy to operate
• Kit includes (depending on model):
  • One or two gate operators with mounting hardware
  • One programmable control panel which operates single leaf or bi-parting gates
  • One 14 x 16 in. weather resistant, UL Listed fiberglass enclosure
  • Two photobeam sets for opening and closing reversing devices
  • One plug-in radio receiver
  • Two radio transmitters
  • Two batteries and transformer
  • Two or four warning signs

Features:

• Numbered locks 1-36 (optional)
• Opening/closing limit switch (mod. LS) 24V DC power supplied to guarantee the highest security
• Management of the limit switches: stops and deceleration
• High precision micrometric limit switches, frontal adjustment
• Horizontal cable exit for installations close to the ground
• Predisposition for the use of the “Gatecoder” deceleration kit Operator with “IN-AXIS” thrust
• Aluminum body completely double-layer coated guaranteeing a higher weather resistance
• Coupling of the half-bodies by gasket
• Rod in stainless steel
• Bronze transmission crown gear
• Rod protective housing (optional for the models 300 mm)

The 415 is available in 8 models:

• 415
  
• 415 with Limit Switch
• 415 Long
• 415 Long with Limit Switch
• 415 24V
• 415 24V with Limit Switch
• 415 24V Long
• 415 24V Long with Limit Switch