All-Rite Doors Logo
For all the "Rite" Loading Dock Solutions

Gate Access Systems - Gate Operators


  • View current newsletter (PDF)

  • Enter your email address below
    to subscribe to our newsletter.

Model 400 Heavy Duty Hydraulic Swing Gate Operator


Model 400 Hydraulic Arm for Single GateThis is the most common hydraulic commercial swing gate operator. It offers a reliable and durable hydraulic system that is easy to install.  For 18' 1300lbs gates.

The Model 400 is specifically designed for situations needing maximum versatility, such as apartment, subdivision, commercial/industrial, and heavy traffic residential applications. Its power, strength, and small size also make it ideal for large, ornate gates. Comes as a complete kit with 1 pair photo eyes, radio receiver and 2 transmitters. NOTE: Requires stop limits, sold separately.

Hydraulic swing gate operators are inherently safer than other types of operators because they do not have "pinch points." In addition, these operators are equipped with a hydraulic bypass valve for extra anti-entrapment protection, and a manual release that allows the gate to be operated in an emergency, such as power failure. A battery back-up unit is also available.

Highlights:

  • Can hydraulically lock your gate in your choice of the opened and/or closed positions.
  • The 400 can be mounted inside the gate and still allow the gate to open to the inside or to the outside.
  • Your gate system will also be set up to provide special options, including "gate-safe" and "gate-secure" configurations:
    • Gate-safe: during power outages, a magnetic lock releases a closed gate to permit emergency access.
    • Gate-secure: during power outages, an electric lock keeps a closed gate locked. The versatile control panel allows for six operating modes including garage-door-like operation, and a new HOLD OPEN function.

Features:

  • Its power makes it ideal for large, ornate gates
  • Perfect for situations needing up to 125 degrees of swing
  • Models available with locks in the opened and/or closed positions
  • Operator is mounted inside the gate but still allows gate to open to the inside or outside
  • A convenient manual release is standard
  • The versatile control panel allows for six operating modes, including garage-door-like operation and a HOLD OPEN function
  • A battery back-up unit is available

The Model 400 can be packaged to include the following:

  • One or two hydraulic gate operators with mounting hardware
  • One 455 D control panel
  • One 14 x 16 in. weather resistant UL Listed fiberglass enclosure
  • Two photobeam sets for opening and closing reversing devices
  • One or two manual release keys
  • One plug-in radio receiver
  • Two radio transmitters
  • 115 VAC receptacle for accessories (5 amp max.)
  • ON/OFF switch controlling power to control panel, accessories and plug outlet
  • Large pre-wired terminals for easy wiring to control panel
  • Test button
  • Two or four warning signs


NOTE: To guarantee the safety and efficiency of its equipment, All-Rite strongly recommends that qualified personnel test the safety system on an annual basis, as well as maintain the overall hydraulic or mechanical system.
Design - Construction - Installation - Service