-
View current
newsletter (PDF)
-
Enter your email address below
to subscribe to our newsletter.
|
AKR-1: Stand Alone Digital Keyless Entry System with a Built-in Radio
Receiver
The Model AKR-1 Exterior Digital Keypad with Radio Receiver is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.
Highlights:
- Surface or gooseneck mount keyless entry system for outdoor applications
- Built-in radio receiver
- Two relay outputs
- Two solid-state outputs
- Two status indicators
- 12-24 volts AC/DC
- Keypad lighting
Features:
- Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities
- Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
- Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs.
- Up to four sets of block coded transmitters (up to 480 transmitters total)
can be used to gain access through the AKR-1’s built-in radio receiver. Four independent outputs and timers: two form C relays and two solid-state open collector outputs
- Each transmitter can be individually suspended or re-activated.
- Four facility codes can be programmed to identify each block of
transmitters.
- A Radio Test Mode is provided for testing transmitters and detecting radio
interference.
- Programming of individual (non-block coded) transmitters is not supported by the AKR-1.
- A fully supervised safety edge transmitter is compatible with the AKR-1.
- This supervised transmitter is used to detect and transmit obstacle events
to the AKR-1 receiver.
- Two LED indicators show system status
- Obstacle signals from
A safety edge transmitter will activate Relay #2.
- Door sense input
- inhibit input
- request-to-exit input
- alarm shunt output
- timed anti-passback
- keypad lockout
- Down light illuminates whenever keypad is used
- Tactile and audible feedback
- Keylock secures keypad to mounting backplate
- RF frequency: 318 MHz
- 4" W x 7" H x 3" D
|
