-
View current
newsletter (PDF)
-
Enter your email address below
to subscribe to our newsletter.
|
CDW Push-up Wood Counter Door
Features
- Oil tempered torsion springs designed for 20,000 life cycles
- ¾" thick prime grade wood slats to
provide a curtain that will not warp or twist over time
- Tubular bottom bar to conceal all locking mechanisms
- Internal System keeps slats together without visible cables or straps
Finish:
- The wood curtain is unfinished. Shellac, varnish, paint, lacquer, or any finish that will effect the upward or downward motion of the
door is not recommended.
- The brackets and the barrel will have one (1) coat of bronze rust-inhibiting prime paint.
- The hood will be furnished unfinished.
Choice of Woods
- Oak/Birch - Available for doors up to 12 feet wide.
- Douglas Fir- Available for doors up to 18 feet wide.
- Specialty Hardwoods
Mounting:
Maximum Size: 9'4" wide x 8'4" high
General:
- Materials furnished with all Wood Counter Doors include all curtains,
bottom bars, guides, brackets, hoods, operating mechanisms and any special
features.
- All Wood Counter Doors are designed to a standard maximum of 10 cycles
per day and an overall maximum of 20,000 operating cycles for the life of
the door.
Operation
- Push-up operated doors open and close with a maximum of 30 pounds of
effort utilizing finger lifts in the bottom bar. This type of operation
shall not be used for doors over 12 feet wide (aluminum) or 10 feet wide
(steel or stainless steel).
Locking Mechanisms
- The push-up doors are secured by means of a concealed sliding bolt
deadlock in the bottom bar operated by a [thumbturn] [cylinder lock].
Installation
- All-Rite Wood Counter Doors must installed by an authorized All-Rite
representative.
Warranty
- All-Rite Wood Counter Doors are warranted for a period of 2 years from
the time of shipment against defects in workmanship and materials.
|
