THERMATITE ADV200 INSULATED STEEL DOOR
Insulated sections fabricated from prepainted, hot dip galvanized, steel sheet; with
rigid polyurethane insulation core, CFC-1 1 free, face sheet stucco embossed and
rib reinforced.
Sections thermally broken, steel-polyurethane-steel sandwich formed by
continuous process.
Sections formed with ship lap joint. 16mm (16ga) galvanized steel endcaps.
Face sheet thickness: T200 0.41mm (24ga)
(0.016")GA=20Ga
Section thickness: T200 51mm (2")
Reinforcement:
Continuous internal reinforcement for hardware mounting.
Weatherstripping:
Neoprene bulb weatherstrip with continuous retainer full width of bottom of door.
Two dual-finned seals between sections.
Finish:
Two coat, baked-on paint system, primer and polyester finish coat (White)
Design:
Door design to meet or exceed industry-standard windload.
Utilizing the latest in polyurethane technology, we've attained the highest 'R'
value per inch of all competitive insulations, as well as providing superior foam steel
adhesion and structural integrity.
OPTIONS FOR THERMATITE ADV200
Glazing:
Full vision glazing section with 12.7mm (½") thick insulating glass or 3mm
(⅛") clear float glass, finish white aluminum.
A-305 X 610mm (12" X 24") dual acrylic thermal set in molded gasket.
B- 610 x 152mm (24" x 6") or CPL- 610 x 203mm (24" x 8") clear float glass sealed unit set in molded frame
D-864 x 407mm (34" x 16") sealed glass unit set in molded frame.
E-610 x 305mm (24" x 12") clear float glass sealed unit set in molded frame.
OTHER OPTIONS
- Combination PVC step plate and lift handle
- Exhaust port 75mm (3"), 100mm (4") diameter
- Neoprene top weatherstrip.
- Full height thermal break and anti-friction strip for galvanized endcaps.
|
