-
View current
newsletter (PDF)
-
Enter your email address below
to subscribe to our newsletter.
|
Series 4500, Model 4575
Heavy Duty Rigid Insulated Industrial Impact Door
 Features:
- Series 4500, Model 4575 will suit door opening sizes up to and including
12'0" wide x 12'0" high
- Double-Dutch models available for openings higher than 10'
- Ideally suited for pedestrian, push cart, and forklift traffic
- Not recommended for high speed forklift traffic
- Available in a wide range of colors. Also available with metal cladding such as; stainless steel, anodized aluminum, galvanized steel either solid or in combination
- Optional heavy duty floor mounted v-cam is standard and combined with the rugged steel tubing interior frame will give years of durable, trouble free service with a minimum of maintenance
- Heavy duty, shock absorbing 5⁄16” thick HDP spring bumpers minimize impact danger from motorized equipment thus protecting the equipment itself, the load, the door panels and most importantly personnel
- Easily replaceable gasket mounted in an aluminum track
- Can be fabricated with a different color face panel on each side
- Protective steel bollards are recommended for areas of high volume forklift traffic
- For custom sizes consult All-Rite
- 12" wide x ¼" thick steel frame mounted to a solid foundation is
recommended for proper anchoring, supplied by others
Door Body:
- Rigid welded frames of rectangular structural steel tubing (2" x 3")
- Reinforced with corner gussets
- All metal parts are coated with top quality baking enamel
- Each panel has a clear safety acrylic ⅛" thick window
- Standard window size is 70% of panel width x maximum 48" high
- Panels are supplied with ½" thick 48" high HDP spring bumpers mounted to
shock absorbing rubber, both sides of each panel
- Upper hardware hinge covers supplied as standard
Hinge Hardware:
- Extra heavy duty floor mounted, v-cam gravity type, double acting,
swinging 90° in each direction
- V-cam gravity hinge hardware is an assembly of 1½" diameter cold rolled
steel shaft and lower deep v-cam gravity hinge complete with 1½" diameter
self-aligning spherical bearing.
- The cam follower bearing is a needle-bearing aircraft type, 1¾ overall
diameter
- The top hinge also has a self-aligning spherical bearing
- All hardware components factory painted with high quality black enamel
Design Features
Top Hinge Assembly |
 |
Bottom Hinge Assembly |
 |
Options:
- Double Dutch (used for openings higher than 10')
- Cane bolts (top and/or bottom)
- Custom window sizes
- Chain locking collar
- ½" thick wear panels (up to 48" high)
- Wide angle hinge (90° - 135°)
- Protective Bollards
- Spring bumper with "D" bumpers insert
- Hold open device
- ½" thick spring bumpers (up to 48" high)
- ¼" thick x 12" extension "U" brackets
- Door stop
- Freezer application
- FOR USE IN AGRICULTURE CANADA AND USDA ESTABLISHMENTS
- Aluminum, Galvanized or stainless steel facings
Double Dutch
(used for openings
higher than 10') |
Cane bolts (top
and/or bottom) |
Custom window
sizes |
Chain locking
collar |
½" thick wear
panels (up to
48" high) |
Wide angle hinge
(90° - 135°) |
Protective
Bollards |
Spring bumper
with "D" bumpers
insert |
Hold Open Device |
Colours:
Black, Brown, Green, Grey, Red, White, Beige, Blue
|
