-
View current
newsletter (PDF)
-
Enter your email address below
to subscribe to our newsletter.
|
MODEL PRO-HHD BELT DRIVE JACKSHAFT
WITH CHAIN HOIST
 STANDARD FEATURES:
- 2 year warranty
- Heavy duty reversing contactor c/w electrical interlock
- Continuous duty motor with overload protection
- Heavy duty 5L V-belt
- ¾" ball bearing on pulley shaft
- 1" cast iron flange bearing on drive shaft
- Final 1" dia. drive shaft
- 24V Fused Control Circuit
- C-2 wiring standard (Constant Pressure Close)
Note: B-2 Wiring can be field set by moving 1 jumper wire.
Safety equipment must be installed when B-2 wiring is used.
- External radio control terminal strip
- Three Button Control Station
- Fully adjustable rotary limit switches
- Powder metal limit cams
- Motor removable without affecting limit setting
- Adjustable friction clutch
- Solenoid brake standard
- #50 roller chain drive & sprockets
- Chain Keeper
- Emergency chain hoist with electrical cutout switch for manual operation
- Left or right hand mounting (must specify at time of order)
- Baked on dark grey coat finish
- Approximate shipping weight 110 lbs.
Horsepower Selection Guide:
|
|
A |
B |
C |
D |
E |
|
Steel |
24ga |
22ga |
20ga |
|
|
Steel
Insulated |
|
|
24ga |
20ga |
16ga |
|
Motor |
|
|
|
|
|
|
1⁄3HP
249W |
320 |
290 |
270 |
180 |
130 |
|
½HP 373W |
400 |
350 |
325 |
250 |
210 |
|
¾HP 560W |
570 |
510 |
460 |
330 |
270 |
|
1HP 746W |
650 |
635 |
575 |
410 |
315 |
NOTES:
For wood doors, use column C
For Aluminum Doors, use column B
For Fiberglass Doors, use column A
Full Load Amp Rating Chart:
|
Voltage |
1⁄3HP |
½HP |
¾HP |
1HP |
|
115-1Ø |
7.9 |
8.5 |
11.6 |
15.0 |
|
230-1Ø |
3.9 |
4.2 |
6.0 |
7.5 |
|
208/230-3Ø |
2.1 |
2.1 |
3.2 |
3.7 |
|
460-3Ø |
1.0 |
1.0 |
1.5 |
1.7 |
|
575-3Ø |
0.8 |
0.8 |
1.2 |
1.4 |
Detailed "Horsepower Selection Guide (PDF)" available
DIMENSIONS
|
