For all the "Rite" Loading Dock Solutions

• Counter Doors
• Counters w/Sill,Trim
  •  Push-up Operated
  •  Crank Operated
  •  Motor Operated
    •  CDF-M Aluminum
    •  CDF-M Steel
    •  CDF-M Stainless Steel
• Wood Counter Doors
• Grilles
• Side Coiling Closures

• View current newsletter (PDF)
• 
  Enter your email address below
  to subscribe to our newsletter.

CDF-M Motor-Operated Counter Door With Seal & Trim

Features

• 10” bracket on all door sizes increases clear opening height
• Oil tempered torsion springs designed for 20,000 life cycles
• 16 gauge stainless steel trim with 14 gauge sill in #4 finish
• Tubular bottom bar to conceal all locking mechanisms
• Split frame construction allows unit to be installed after door opening is finished
• Can be installed in any wall thickness ranging from 2½” to 16”

Choice of Curtain and Bottom Bar Finish

Mounting:  Between jamb mounted

Maximum Size:  14’4” wide x 6’4” high

General:

• Materials furnished with all Counter Doors with Sill & Trim include all curtains, bottom bars, guides, brackets, hoods, operating mechanisms and any special features.
• All Counter Doors with Sill & Trim are designed to a standard maximum of 10 cycles per day and an overall maximum of 20,000 operating cycles for the life of the door.

Operation

• The rolling counter door is operated at a speed of ½ foot per second by a model 11 motor operator.
• The motor operator includes an electric motor with gear reducer in oil bath, geared limit switch and emergency release for push up operation. The motor operator is 115 volt single phase.
• The motor starter is housed in a NEMA 1 housing and include a 24 volt control transformer and complete terminal strip to facilitate field wiring.
• The motor operator is activated by a 3 button push-button station (other controls as selected) in NEMA 1 enclosure.
• The motor operator is mounted to the door bracket as shown on the drawings. All motor operators are U. L. Listed.

Locking Mechanisms

• Motor operated counter doors are secured by means of a concealed sliding bolt deadlock in the bottom bar operated by a (thumbturn) (cylinder lock), electrically interlocked to prevent the motor from operating when the door is locked.

Installation

• All-Rite Rolling Counter Doors with Sill & Trim must installed by an authorized All-Rite representative.

Warranty

• All-Rite Rolling Counter Doors with Sill & Trim are warranted for a period of 2 years from the time of shipment against defects in workmanship and materials.