-
View current
newsletter (PDF)
-
Enter your email address below
to subscribe to our newsletter.
|
CDF-M Motor-Operated
Aluminum Counter Door With Seal & Trim
Mounting: Between jamb mounted
Maximum Size: 14’4” wide x 6’4” high
General:
- Materials furnished with all Aluminum Rolling Counter Doors with Sill &
Trim include all
curtains, bottom bars, guides, brackets, hoods, operating mechanisms and any
special features.
- All Aluminum Rolling Counter Doors with Sill & Trim are designed to a standard maximum of 10
cycles per day and an overall maximum of 20,000 operating cycles for the life of
the door.
Materials
- The door curtain is constructed of interconnected .050 extruded
aluminum No. 8 (15⁄16” high by ⅜” deep) slats.
- The bottom bar is constructed of tubular extruded aluminum measuring
15⁄16” deep by 2¼” high and includes a safety edge system
- The integral door frame and guides are constructed of 16 gauge stainless
steel at the head and jambs and 14 gauge stainless steel at the sill.
- The sill extends 4” on either side of the wall.
- All frame joints are flush and smooth.
- The brackets are constructed of ⅛” thick steel plate.
- The barrel is steel tubing of not less than 4” in diameter.
- Oil tempered torsion springs are capable of correctly counter balancing
the weight of the curtain.
- The barrel is designed to limit the maximum deflection to .03” per foot
of opening width.
- The hood is fabricated from 24 gauge stainless steel and is formed to fit
the square brackets.
- The motor is completely enclosed by a stainless steel cover
Finish:
- Aluminum Bronze Anodize:
The curtain and bottom bar have a bronze anodized finish.
The finish on the integral frame (head, jambs and sill) and on the hood is #4.
The finish on the barrel is one (1) coat of bronze rust-inhibiting prime paint.
- Aluminum Clear Anodize:
The curtain and bottom bar have a 204-R1 clear anodized finish.
The finish on the integral frame (head, jambs and sill) and on the hood is #4.
The finish on the barrel is one (1) coat of bronze rust-inhibiting prime paint.
Safety Edge System:
- Featheredge:
The bottom bar includes the Featheredge safety edge system.
The Featheredge
rolling door safety edge system includes the following features:
- The Featheredge device will be installed on the bottom bar of the door
and will automatically reverse the door if the device detects an obstruction
in the downward travel of the door.
- The Featheredge consists of a rubber boot attached below the bottom bar
with an electrical switch secured to the back of the bottom bar.
- The Featheredge operates with air wave technology and does not rely on
pneumatic pressure or electrical strip contacts to operate properly.
- The Featheredge creates an air wave that will be detected and reverse the
direction of the rolling door.
- The operation of the Featheredge is not subject to interferences by
temperature, barometric pressure, water infiltration, or cuts in the rubber
boot.
- The Featheredge is connected to the motor with a coil cord.
- Phantom Featheredge:
The bottom bar includes the Phantom Featheredge safety edge system.
The Phantom
Featheredge rolling door safety edge system includes the following features:
- The Phantom Featheredge device will be installed on the bottom bar of the door
and will automatically reverse the door if the device detects an obstruction
in the downward travel of the door.
- The Phantom Featheredge consists of a rubber boot attached below the bottom bar
with a switch secured to the back of the bottom bar.
- The Phantom Featheredge operates with air wave technology and does not rely on
pneumatic pressure or electrical contacts to operate.
- The Phantom Featheredge creates an air wave that will be detected by the switch
which reverses the downward direction of the rolling door.
- The Phantom Featheredge does not require a connection cord or any means of
electrical connection to the motor control panel.
- The Phantom Featheredge is of fail-safe construction, and on every cycle performs
a self diagnostic test. If any part of the Phantom Featheredge fails, the door
closing operation changes from momentary pressure to constant pressure requiring
constant pressure on the close control station to move the door in a downward motion.
Repairing the Phantom Featheredge will automatically return the closing operation
to momentary pressure.
- The operation of the Phantom Featheredge is not subject to interferences by
temperature, barometric pressure, water infiltration, or punctures and small tears.
- The Phantom Featheredge performs with an extremely small amount of impact pressure.
Operation
- The rolling counter door is operated at a speed of ½ foot per second
by a model 11 motor operator.
- The motor operator includes an electric motor with gear reducer in oil
bath, geared limit switch and emergency release for push up operation. The
motor operator is 115 volt single phase.
- The motor starter is housed in a NEMA 1 housing and include a 24 volt
control transformer and complete terminal strip to facilitate field wiring.
- The motor operator is activated by a 3 button push-button station (other
controls as selected) in NEMA 1 enclosure.
- The motor operator is mounted to the door bracket as shown on the
drawings. All motor operators are U. L. Listed.
Locking Mechanisms
- Motor operated counter doors are secured by means of a concealed sliding
bolt deadlock in the bottom bar operated by a (thumbturn) (cylinder lock),
electrically interlocked to prevent the motor from operating when the door
is locked.
Installation
- All-Rite Aluminum Rolling Counter Doors with Sill & Trim must installed by an
authorized All-Rite representative.
Warranty
- All-Rite Aluminum Rolling Counter Doors with Sill & Trim are warranted for a period of
2 years from the time of shipment against defects in workmanship and materials.
|
