For all the "Rite" Loading Dock Solutions

• Counter Doors
  •  Push-up Operated
    •  CD8-1
    •  CD10-1
    •  CD10-1SS
    •  CD8-2
    •  CD10-2
    •  CD10-2SS
  •  Crank Operated
  •  Motor Operated
• Counters w/Sill,Trim
• Wood Counter Doors
• Grilles
• Side Coiling Closures

• View current newsletter (PDF)
• 
  Enter your email address below
  to subscribe to our newsletter.

CD10-2SS Motor-Operated Stainless Steel Rolling Counter Door

Mounting:  Between jamb mounted

Maximum Size:  10’4” wide x 7’4” high

General:

• Materials furnished with all Stainless Steel Rolling Counter Doors include all curtains, bottom bars, guides, brackets, hoods, operating mechanisms and any special features.
• All Stainless Steel Rolling Counter Doors are designed to a standard maximum of 10 cycles per day and an overall maximum of 20,000 operating cycles for the life of the door.

Materials

• The door curtain is constructed of interconnected strip stainless steel slats.
• The curtain is constructed of 22 gauge No. 10 (1¼” high by ⅜” deep) slats.
• The bottom bar is constructed of tubular extruded aluminum measuring 15⁄16” deep by 2¼” high with a double vinyl astragal on the bottom edge.
• The guides are constructed of a stainless steel angle and channel, 1⅞” square.
• The brackets are constructed of 3⁄16” thick die cast aluminum and have stainless steel end covers.
• The barrel is steel tubing of not less than 4” in diameter. Oil tempered torsion springs are capable of correctly counter balancing the weight of the curtain. The barrel is designed to limit the maximum deflection to .03” per foot of opening width. The barrel has one (1) coat of bronze rust-inhibiting prime paint.
• The hood is fabricated from 24 gauge stainless steel and is formed to fit the square brackets.

Finish:

• The curtain, bottom bar, guides and hood have a #4 polished stainless steel finish.

Operation

• Push-up operated doors open and close with a maximum of 30 pounds of effort utilizing finger lifts in the bottom bar . This type of operation should not be used for doors over 10 feet wide.

Locking Mechanisms

• The push-up doors are secured by means of a concealed sliding bolt deadlock in the bottom bar operated by a [thumbturn] [cylinder lock].

Installation

• All-Rite Stainless Steel Rolling Counter Doors must installed by an authorized All-Rite representative.

Warranty

• All-Rite Stainless Steel Rolling Counter Doors are warranted for a period of 2 years from the time of shipment against defects in workmanship and materials.