-
View current
newsletter (PDF)
-
Enter your email address below
to subscribe to our newsletter.
|
CD10-2 Push-up Operated Steel Rolling Counter Door
Mounting: Between jamb mounted
Maximum Size: 10’4” wide x 7’4” high
General:
- Materials furnished with all Steel Rolling Counter Doors include all
curtains, bottom bars, guides, brackets, hoods, operating mechanisms and any
special features.
- All Steel Rolling Counter Doors are designed to a standard maximum of 10
cycles per day and an overall maximum of 20,000 operating cycles for the life of
the door.
Materials
- The door curtain is constructed of interconnected strip steel slats
conforming to ASTM A-653.
- The curtain is constructed of 22 gauge No. 10 (1¼” high by ⅜” deep)
slats.
- The bottom bar is constructed of tubular extruded aluminum measuring 15⁄16”
deep by 2¼” high with a double vinyl astragal on the bottom edge.
- The guides are constructed of extruded aluminum and measures 1¾”
square. Each side of the channel portion capturing the curtain contains
wool pile weatherstripping.
- The brackets are constructed of 3⁄16” thick die cast aluminum.
- The barrel is steel tubing of not less than 4” in diameter. Oil
tempered torsion springs are capable of correctly counter balancing the
weight of the curtain. The barrel is designed to limit the maximum
deflection to .03” per foot of opening width. The barrel has one (1)
coat of bronze rust-inhibiting prime paint.
- The hood is fabricated from 24 gauge galvanized steel and is formed to fit
the square brackets.
Finish:
- ColorCote:
The curtain, bottom bar, guides and hood have a ColorCote finish. ColorCote consists of the following:
1. Hot dipped galvanized G-90 coating consistent with ASTM A-653
2. Bonderized coating for prime coat adhesion
3. Factory applied Thermosetting Powder Coating applied with a minimum thickness
of 2 mils. The color shall be selected by the architect and shall be chosen from
[standard color charts] [custom color selection].
- The ColorCote finish is such that there is no corrosion
when the material is subjected to salt spray resistance test
ASTM B-117 for 1000 hours.
- FinalCote:
The curtain, bottom bar, guides and hood will have a FinalCote finish.
FinalCote consists of the following:
1. Hot dipped galvanized G-90 coating consistent with ASTM A-653
2. Bonderized coating for prime coat adhesion
3. Corrosion inhibiting primer - .2 mils per side
4. Thermo-setting tan polyester top coat with a minimum thickness of .6 mils
each side
Operation
- Push-up operated doors open and close with a maximum of 30 pounds of
effort utilizing finger lifts in the bottom bar . This type of operation should
not be used for doors over 10 feet wide.
Locking Mechanisms
- The push-up doors are secured by means of a concealed sliding bolt
deadlock in the bottom bar operated by a [thumbturn] [cylinder lock].
Installation
- All-Rite Steel Rolling Counter Doors must installed by an
authorized All-Rite representative.
Warranty
- All-Rite Steel Rolling Counter Doors are warranted for a period of
2 years from the time of shipment against defects in workmanship and materials.
|
