For all the "Rite" Loading Dock Solutions

• Counter Doors
  •  Push-up Operated
  •  Crank Operated
  •  Motor Operated
    •  CD8-1M
    •  CD10-1M
    •  CD10-1MSS
    •  CD8-2M
    •  CD10-2M
    •  CD10-2MSS
• Counters w/Sill,Trim
• Wood Counter Doors
• Grilles
• Side Coiling Closures

• View current newsletter (PDF)
• 
  Enter your email address below
  to subscribe to our newsletter.

CD8-2M Motor Operated Aluminum Rolling Counter Door

Mounting:  Between jamb mounted

Maximum Size:  20’4” wide x 7’4” high

General:

• Materials furnished with all Aluminum Rolling Counter Doors include all curtains, bottom bars, guides, brackets, hoods, operating mechanisms and any special features.
• All Aluminum Rolling Counter Doors are designed to a standard maximum of 10 cycles per day and an overall maximum of 20,000 operating cycles for the life of the door.

Materials

• The door curtain is constructed of interconnected .050 extruded aluminum No. 8 (15⁄16” high by ⅜” deep) slats.
• The bottom bar is constructed of tubular extruded aluminum measuring 15⁄16” deep by 2¼” high
• The guides are constructed of extruded aluminum and measures 1¾” square. Each side of the channel portion capturing the curtain contains wool pile weatherstripping.
• The brackets are constructed of 3⁄16” thick die cast aluminum.
• The barrel is steel tubing of not less than 4” in diameter. Oil tempered torsion springs are capable of correctly counter balancing the weight of the curtain. The barrel is designed to limit the maximum deflection to .03” per foot of opening width.
• The hood is fabricated from .040 aluminum and is formed to fit the square brackets.

Finish:

• Aluminum Bronze Anodize:
  The curtain, bottom bar, guides, barrel and hood have a bronze anodized finish.
• Aluminum Clear Anodize:
  The curtain, bottom bar, guides, barrel  and hood have a 204-R1 clear anodized finish.

Safety Edge System:

• Featheredge:
  The bottom bar includes the Featheredge safety edge system.
  The Featheredge rolling door safety edge system includes the following features:
  
  • The Featheredge device will be installed on the bottom bar of the door and will automatically reverse the door if the device detects an obstruction in the downward travel of the door.
  • The Featheredge consists of a rubber boot attached below the bottom bar with an electrical switch secured to the back of the bottom bar.
  • The Featheredge operates with air wave technology and does not rely on pneumatic pressure or electrical strip contacts to operate properly.
  • The Featheredge creates an air wave that will be detected and reverse the direction of the rolling door.
  • The operation of the Featheredge is not subject to interferences by temperature, barometric pressure, water infiltration, or cuts in the rubber boot.
  • The Featheredge is connected to the motor with a coil cord.
• Phantom Featheredge:
  The bottom bar includes the Phantom Featheredge safety edge system.
  The Phantom Featheredge rolling door safety edge system includes the following features:
  
  • The Phantom Featheredge device will be installed on the bottom bar of the door and will automatically reverse the door if the device detects an obstruction in the downward travel of the door.
  • The Phantom Featheredge consists of a rubber boot attached below the bottom bar with a switch secured to the back of the bottom bar.
  • The Phantom Featheredge operates with air wave technology and does not rely on pneumatic pressure or electrical contacts to operate.
  • The Phantom Featheredge creates an air wave that will be detected by the switch which reverses the downward direction of the rolling door.
  • The Phantom Featheredge does not require a connection cord or any means of electrical connection to the motor control panel.
  • The Phantom Featheredge is of fail-safe construction, and on every cycle performs a self diagnostic test. If any part of the Phantom Featheredge fails, the door closing operation changes from momentary pressure to constant pressure requiring constant pressure on the close control station to move the door in a downward motion. Repairing the Phantom Featheredge will automatically return the closing operation to momentary pressure.
  • The operation of the Phantom Featheredge is not subject to interferences by temperature, barometric pressure, water infiltration, or punctures and small tears.
  • The Phantom Featheredge performs with an extremely small amount of impact pressure.

Operation

• The rolling counter door is operated at a speed of ½ foot per second by a model 11 motor operator.
• The motor operator includes an electric motor with gear reducer in oil bath, geared limit switch and emergency release for push up operation. The motor operator is 115 volt single phase.
• The motor starter is housed in a NEMA 1 housing and include a 24 volt control transformer and complete terminal strip to facilitate field wiring.
• The motor operator is activated by a 3 button push-button station (other controls as selected) in NEMA 1 enclosure.
• The motor operator is mounted to the door bracket as shown on the drawings. All motor operators are U. L. Listed.

Locking Mechanisms

• Motor operated counter doors are secured by means of a concealed sliding bolt deadlock in the bottom bar operated by a (thumbturn) (cylinder lock), electrically interlocked to prevent the motor from operating when the door is locked.

Installation

• All-Rite Aluminum Rolling Counter Doors must installed by an authorized All-Rite representative.

Warranty

• All-Rite Aluminum Rolling Counter Doors are warranted for a period of 2 years from the time of shipment against defects in workmanship and materials.